Spring Beaded Garland DIY Tutorial with Colorful Stained Beads

Posted by Dawn Gaddis on

I absolutely LOVE wood bead garland. I wanted to create a bead garland for my Spring Tier Tray. So I grabbed 2 sizes of bead, some paint and got started. I think this garland turned out so rustic and sweet.

 

Step 1. Staining the Beads

Instead of painting the 14 mm beads, I thought I would try a paint water mix to stain them.

To make the stain I used water and 5 different Spring colors: Yellow, Purple, Pink, Green, and Blue. I thought these colors would look amazing and Spring-like strung together.

  • I poured water into 5 plastic cups and then added the different paint colors to the water and stirred them well.
  • I used a piece of twine and placed 5 of the 14 mm beads on it.
  • I then submerged the beads into the paint and water mixture.
  • I left the beads soaking in the mixture overnight.
  • The next morning this is what the cups looked like.
  • I pulled all of the beads out and placed them on a box.
  • I used my hot air gun to dry the beads.
  • Since the colors were a little lighter than I wanted after drying I mixed more paint with the water in the cups and placed the beads back in the mixture for a couple more hours.
  • I then dried the beads again with my hot air gun to make sure I liked the colors.
  • And the colors were perfect!

 Step 2. Aging the Beads

  • I removed the beads from the twine I had used to stain them and placed them onto a paper towel in separate stacks.
  • I wanted the beads to have an aged, worn look to them.
  • To achieve this I used very fine grit sandpaper and lightly sanded each of the beads.

 Step 3. Stringing the Beads

  • I used a piece of painter's tape and secured it to the end of the twine I am using for the garland. I did this so it would be easier to slip the beads onto the twine.
  • I placed 1 bead of each color onto the twine and then I placed a 16 mm natural color bead before starting the next set of colored beads.
  • I continued adding the beads in this manner until I had used all the colored beads.

Step 4. Creating and Attaching the Tag

  • I used this little mason jar-shaped tag and painted it with Waverly Plaster chalk paint.
  • I painted the tag and then used my hot air gun to dry it quicker.
  • I gave the tag a second coat of paint and again dried it with my hot air gun.
  • Once the front of the tag was dried I turned the tag over and did the same thing on the back and sides.
  • I used 2 buttons and painted them with gray chalk paint.
  • Once the button were dry I created a little bunny by gluing them onto the tag.
  • I then glued a Dollar Tree pompom on the bottom button to give the bunny a tail.
  • The pompom was a little too fluffy for me so I used my scissors and trimmed it down.
  • For the bunny ears, I used a pipe cleaner, cut it down to size, shaped it into a bunny ear shape, and glued it to the tag.
  • I used a piece of the same ribbon I had used on the tassel around the neck of the bunny and glued it into place.
  • To attach the tag to the garland I pull the twine from the garland through the hole of the tag, tied a knot, and glued it.
  • I thought the bunny was a little light on this white tag so I used some antiquing wax and the dry brush method to darken it up a little and to give it more of a rustic farmhouse look.

Step 5. Creating and Attaching the Tassel

  • For the tassel, I used some of this purple ribbon I had in my stash and some of the twine I had strung the beads on.
  • I wrapped the ribbon and twine around my hand 10 times and then cut it at the bottom.
  • I left the ribbon and twine wrapped around my hand and placed another piece of twine around the top center of the tassel.
  • I tied the twine around the top of the tassel, wrapped it around the tassel again, and then tied a knot to hold the tassel together.
  • I cut the bottom of the tassel.
  • For the top of the tassel, I used twine and wrapped it around the top until I was happy with the way it looked and then used hot glue to hold it in place.
  • I then took the twine from the garland and the twine from the tassel, tied them together, and added hot glue to hold it.

 

Items Used for this project:

 Dollar Tree:

  • Twine
  • Ribbon

 Other:

  • 14 mm Wood Bead
  • 16 mm Wood Bead

  

Products I Recommend and Use on a Regular Basis:

 

*As an Affiliate, we may earn a small commission when you purchase thru our link at no extra cost to you.*

Most Popular DIY Videos on YouTube

 

 

Join my community

to get FREE Printables and Special Deals only for my subscribers.

 

 

My Disclaimer: All of the video footage, photos, and designs are created by me and are owned by Designs By Gaddis. You may only use the video footage, photos, and designs with my permission. My content is mine and it is protected. I am not sponsored or paid by any of the product companies or tools shown in these videos unless otherwise mentioned. I have full rights and control of the content.

Copyright @ Designs By Gaddis 2021. Any reproduction or illegal distribution of the content in any form will result in immediate action against the person concerned.

0 comments

Leave a comment

Please note, comments must be approved before they are published